Skating

Posted by admin on Saturday, May 8, 2010 · Leave a Comment

Skating

Ice Skating … Get Competitive advantage

Speaking in general terms, if you play a sport, now you’r inclined to seek a competitive advantage. The desire to win, compete, excel, challenge and improve are just some of the underlying reasons why a sport is played. Golf is a good example of a sport that sparks the desire to seek a competitive advantage. Buy a bigger driver, a nicer putter, a set of custom built irons … the list seems endless. The reality is that all these things can and often does improve your golf game. If you’ve ever played golf with a set of golf clubs that are too short … long … wrong flex … etc. then you probably experienced frustrating difference it makes to your score when you compare it with the positive results of using a set of golf clubs that are the correct fit and style for you!

Not unlike golf, is a world of skating the same. Skaters are always looking for a competitive advantage, so … with a second summer hockey schools well under way and hockey tryouts just around the corner, we wanted to give you insight into a fundamental way to help you to help achieve a competitive advantage The advantage with your skating … It takes a little knowledge …

A common question we get asked by parents of young skaters, and skaters in general is …. “How are my skates would fit?”. This question is generally ahead with such questions and comments like “I hate my skates “” Why do my feet always hurt when I skate? “” I’m just not so fast with these skates, “or where much growing room is enough? …

Although skate design and technology has changed dramatically over the past few years, fundamental to how a skate be fit to be comfortable and do not.

Basically there are three issues to consider when buying skates. First foremost is the obvious question of buying a pair of skates that are comfortable. Second, to comfort, is that your skates must fit properly to perform … the right size (length) and width. (Not unlike the “real” golf club) The third account to fit skates, but equally important is to choose the right brand and model of the product. Far too often skaters focus on buying the same skates that they have seen their skating idol wearing or they see only the expensive skates, because obviously (to them) they are the best.

Clearly, what we know is … it does not matter how much you pay for your skates or what famous skater is wearing the product, if the skates you purchase do not fit properly your skating Performace may adversly affected.Read on for some insight into how to get it competitive advantage by being certain your skates fit.

The basics of how skates should fit

First) A skate does not fit the same as a shoe.

2nd) The hockey skate … in all cases will fit 1 to 1 ½ sizes smaller than your shoe

3). ½ size grows room is all that is necassary and will generally get a growing foot through a full season of hockey

Allowing more growing space than ½ size can lead to blisters, premature breakdown of the skate and reduced performance of the skate to skate. Widths in skating is not the same as in a shoe … For example, A “EE” width a shoe that resembles a “D” width

4th) Do not just focus on one brand and model!

Different models of skates are built to accommodate different skating ability and physical size, types of feet and different price ranges. These are key points when considering what skates to purchase. It is important to be honest about the level of skating that you or your skater is at. A skate that is too stiff, is one of the largest contributors to the poor skating performance.

5th) Skate manufacturers skates all fit differently.

It is possible that even if you think you would like to try Bauer skates, can not skate works best for you because the “last” (sort of boot) is not suitable for the shape of your foot. It is important to try more than one manufacturer skate if you are unsure. Comparison and a great skate technician is ultimately the best way to do the right decision for you.

6th) Skates are designed for to care when they are laced up!

The number one reason skaters end up in skates that are too large is that they do not lace the skate all the way up. Because of the shape of a skate, the foot will just sit back in the boot properly when the skate is laced to the top of the luggage compartment. If you look at the profile of a skate boot, it is easy to see the “sweep” up top. Since the skate is laced up it draws the foot back in the heel. A new pair of skates that fit will almost always feel short, when they are first on foot before lacing.

Do you know that …

for a non-growing feet. When standing with your skates laced up the longest toe of your foot should be slightly feathered at the end of the boot. When you bend your knees … so you want when you skate … toe should pull away from the front the luggage compartment. Any pressure points that you have on the sides of the foot or ankle bones should be adjusted (made comfortable) the person fits your skates.

How very Growing Room is enough?

A ½ size growing room is about ¼ of an inch. Allowing more growing space than a ½ size set skater risk for things like blisters on the heel and arches. Besides, the performance of skate decreases dramatically because of movement of the feet of skate combined with a blade there is too long to boot and thus too long for skaters foot.

Make sure your foot is measured correctly!

Although it may give you a place to start … fingers … pencils … or look down on the back of the boot is just a big skate mistake waiting to happen. If the shop to suit your skates understand the products they sell and how to fit skates, so they will know how to accurately use a measuring stick. To avoid the inevitable blisters, sore feet and bad skating results that occur with poor fitting skates, be sure that a measuring stick used.

About the Author

Patrick Francey is recognized internationally as a’ skate fit and performance’ expert.He has worked with hockey players and figure skaters, including NHL and world class figure skaters. Discover how
“To Be Your Best”
Learn more at http://www.pro-skate.com

Skating bails

Youngstown Glove Co. General Utility Plus Performance Glove, Black

…

Crocodile Creek Youth lunchbox (Skate)

$12.95

Designed specifically for older children! After many requests for a line of lunch boxes for older kids, we asked our designers to come up with some styles that would appeal to children that have grown beyond dinosaurs and ladybugs. We’re thrilled with the results. You’ll find the same great quality and same great features that you’ve come to expect from Crocodile Creek….

Shoe Goo Clear 3.7 Oz

$4.19

Rebuild your worn-out soles overnight.
Seal rubber boots, galoshes, and waders.
Coat and protect shoes to avoid premature wear.
Repair damaged heels.
Secure loose insoles.
Reinforce skate shoes.
Coat skateboards for extra traction….

Gershwin on Ice

$18.50

See Olympic Champion Dorothy Hamill and a cast of world-class skaters perform in this unforgettable home video….

Snoopy Double Feature Vol. 7 (Play it Again/She’s a Good Skate) [VHS]

$9.95

…

She’s a Good Skate / It’s Flashbeagle Charlie Brown – Double Feature

…

Bell Riders Street Shred Hand, Knee and Elbow Pad Set

$18.99

The Bell Riders Hand, Knee and Elbow Pad Set keeps kids protected while they’re riding or skating.

BPA Free
Lead Free…

Razor RipSkate

Carve like a RipStik or ride like inline skates with the Razor RipSkate caster skates. The original RipStik was best described as a cross between a skateboard and a snowboard, with a pivoting deck and inclined casters producing a snowboard-like carving ability. The RipSkate, however, adds a twist by functioning as two separate skates–each fitting your shoes almost perfectly–or like a RipStik via…

Strawberry – Spiritual Sky Scented Oil – 1/4 Ounce Bottle

$3.95

Spiritual Sky Body OilsLong lasting fragrances created from essential oils are p erfect foreveryday wear or for when you want to create a special mood or feeling ….

CS Hyde Extended Life PTFE Mouse Discs, Tan Color, 1 Diameter (Pack of 20)

$8.83

Our C4NGen surface is specially coated in pure PTFE to give it a super-slippery feel, but until you have outfitted your mouse with our PTFE accessories, you won’t be able to unleash our pads’ ultimate potential. Whether it be with Mouse Disks, Dots, Skates or Tape, making a PTFE-on-PTFE connection between your mouse and pad would definitely be a smooth move. Increases speed, agility, and accurac…